Yuku free message boards

Custom Vmax Services wrote:

---

Wavey Discs Pairs Or Singles





Floating 298mm Wavy discs available at £140 + £10 p&p
Singles at £70 + £8 p&p

These Look Very Similar To Galfer Discs, but with Black centres.

Early 41mm Front Forks Calliper Brackets

I have added some relief to match the back Hanger.





These Brackets will enable the fitment of the 4 pot Blue Spot callipers from a lot of the Yamaha range, you can also fit the later 4 pot callipers from the late Vmax if you want.

Please Note

You will need to buy a set of late discs from the Yamaha range, the 298mm Floating types fitted to a lot of the late 90's early 00's bikes. The 6 bolt versions.
Or Ideally the Wavey Discs I supply above.

£80/pr + £8 p&p

Blue Spot Callipers



I usually have a selection of Blue Spot Calipers in stock for Immediate delivery.

£80 + £10 p&p

Early 41mm Front Fork, Brake Upgrade


p.s. The calipers, disc and hangers in the picture are for demonstration only.

Second hand 4 Piston Blue Spot Callipers
2 X Second Hand 298mm Floating Discs
12 X M8 Stainless Disc Bolts
2 X New Billet Brake Hangers (As Above, not in picture)

£220 + £10 p&p (Please allow upto 3 weeks delivery, as this kit takes a while to assemble)

Blue Spot 4 Piston Caliper Rear Brake Upgrade

This will replace your standard caliper bracket, to enable the fitment of a right front Blue Spot 4 Piston Yamaha caliper.
You will need to fit a 298mm front disc to the rear, as the standard Max one is too thick.
(Or you can fit the standard 4 pot Max caliper if you want)

£80 + £10 p&p
Below is a list of Yamaha's that use this caliper.

FZS600 1998-2003
THUNDERCAT 1996-2003
YZF R6 1999-2004
TDM900 2002-2005
FZS FAZER 1000 2001-2006
THUNDERACE 1996-2002
YZF R1 1998-2003
FJR 1300 2001-2005
XJR 1300 1999-2002







I can also supply this as a kit:-
Detailed below.


p.s. The caliper and disc in the picture are for demonstration only.


Caliper Hanger (New)
Blue Spot Caliper (Used)
298mm Disc (Used)
Braided Line (New)
St/Steel Disc Bolts (New)
St/Steel Caliper Bolts (New)

£180 + £10 p&p (Please allow upto 3 weeks delivery, as this kit takes a while to assemble)

Underslung Caliper Hanger

This conversion will allow the fitment of an R1 Blue spot rear caliper (1998-2002). A torque arm lug will need to be welded to the swingarm to take your aftermarket torque arm. The lug comes supplied with the Bracket.
You will need to supply your own caliper.
This conversion is ideal as an added extra to having one of my braced swingarms, as the lot can be supplied as a kit.
The additional braking that this caliper offers is unbelievable over standard.

Fits with standard Vmax disc 282 mm
£75 + £8 p&p
or
To fit a 298 mm Disc
£80 + £8 p&p
or
To fit a 320mm disc
£90 + £8 p&p







Or you could fit it on top like this.

Single Blue Spot Caliper



I usually have Blue Spot Rear calipers in stock for imediate delivery

£40 + £8 p&p

NOTCHED & BRACED SWINGARM

All Swingarm prices are Exchange, add 40 to cost for outright purchase, i.e. no Exchange.
Please Allow upto 28 Days for Delivery, as these are made to order.

This modification will allow the fitment of an aftermarket exhaust, and 17" wheel, the notching will allow clearance for a 180 and some 190 section tyres.
Comes in Powder Coated Silver or Black
£90 exchange + £15 p&p
Please Note
This swingarm will not fit with standard Exhausts, but will take a standard rear wheel.



NOTCHED & BRACED FOR STANDARD EXHAUST
This modification allows the swingarm to be fitted with standard exhausts in place, and also a standard wheel, or 17".
£110 exchange + £15 p&p


FITTED HUGGER
I also provide a Hugger fitting service, to any swingarm at an additional cost of £20 if done at the same time as a braced swingarm, (i.e. weld the brackets in place)
Or £50 if no bracing is required, this includes stripping and re-powder coating, (i.e. weld the brackets in place)
Or + £80 if I supply the hugger, in which case there is no additional charge for welding the lugs on.



DIY KIT
The DIY kit will enable you to weld the brace in place yourself.
£38 + £8 p&p as pictured (For Systems with Balance pipes)



Or £47 + £8 p&p For The Standard Kit



Please allow upto 3 weeks for delivery.

Swingarm Bearings

I can supply Bearings for the swingarms at £30 / pr, + £2 p&p this does not include the seals.

SHORTENED SIDE STANDS
Shortened sidestands supplied, ideal for your 17" wheel convertions.
£35.00 inc p&p Exchange



WRAP AROUND RAD GRILLES
Manufactured from Mirror polished Stainless Steel, come complete with Stainless fixing screws.
Or Black Powder Coated
£30.00 + £5 p&p



GIVI LUGGAGE FITMENT KIT
Fitting Kit to enable a Givi Wingrack 2 to be fitted to your Vmax, which will then enable any of the boxes that Givi make to be fitted, and will convert your Max to a high speed tourer.
(As Below)
£70 + £10 p&p





BRAIDED HOSES
I can now supply Stainless Steel braided lines, cut to any length, (maximum 1.7mtrs) they come with 20 deg stainless fittings either end, and copper washers.
Please state length from centre to centre and oriantation of banjo's when ordering, Next day service.
1 Line......£25
2 Lines.....£49
3 Lines.....£73
4 Lines.....£96

All Lines Are Free p&p

STAINLESS STEEL BOLTS

M10 X 30 Metric Fine (Caliper Bolts) £3.00ea... Free p&p
M8 X 25 Disc Bolts (Set Of Eighteen) £13.......... Free p&p


BANJO BOLTS
All Stainless Steel
Singles M10 X 1.25mm £3.75
Singles M10 X 1.00mm (Non Max) £3.75
Doubles M10 X 1.25mm £4.75

Free Delivery on all Banjo Bolts

Billet Ally Thundercat Front Wheel Spacers
These are required when fitting a Thundercat wheel to your Standard Forked Vmax. (Will not fit with aftermarket forks)
Saves you grinding your original spacer to fit.

£6 inc p&p

Exhaust End Cans
I now offer a shortening service, if you want your end can cut down or wadding taken out, I can now supply this service.



Contact me for prices, normally between £25 & £30 a can + return p&p

CONTACT DETAILS

E-mail:- sales@customvmaxservices.co.uk
Tel:- 01933 2790003
Mob:- 07736 049401

PAYMENT BY PAYPAL
This will allow you to pay by credit card if you want.
Click Here For Paypal Log In, Click Send Money, type in :- customvmaxservices@sky.com