DIRECT FIT REMOTE RESERVOIR POTS
Available in either Silver or Red, these reservoir pots will fit as a direct replacement into the top of the
existing reservoir mounts on the Nissin range of Remotes, and some other makes of remote. They come with a screw top lid and black rubber internal damper, and
also include the Ally adapter, rubber tube and clips.
£32 each + £2.00 p&p
Number Plate Holder
Available in Grained Ally or Black Powder Coat:-
140mm Wide, with 2 20 x 6mm number plate fixing slots
50mm High
40mm long Fixing lugs with 6mm holes
2 8mm Indicator fixing holes
£8.50 ea inc p&p .........(Please State Colour When Ordering)
Wavey Discs Pairs Or Singles
Floating 298mm Wavy discs available at £170 + £10 p&p
Singles at £85 + £8 p&p
These Look Very Similar To Galfer Discs, but with Black centres.
Early 41mm Front Forks Calliper Brackets
I have added some relief to match the back Hanger.
£80/pr + £8 p&p
These Brackets will enable the fitment of the Blue Spot calipers from a lot of the Yamaha range, you can also fit the later
Std. 4 pot callipers from the late Vmax if you want.
Please Note
You will need to buy a set of late discs from the Yamaha range, the 298mm Floating types fitted to a lot of the late 90's early 00's bikes. The 6 bolt
versions.
Or Ideally the Wavey Discs I supply above.
You can not use discs from the later 2004/5/6/7/8 R1's as they are 5 bolt & 320 / 310 mm dia
Blue Spot Callipers
I usually have a selection of Blue Spot Calipers in stock for Immediate delivery.
Blue Spots From £75 + £10 p&p
Gold Spots From £85 + £10 p&p
Early 41mm Front Fork, Brake Upgrade
With Standard Floating Discs
Or Waveys
Kit Includes:-
2 X Second hand 4 Piston Blue Spot Callipers
2 X Second Hand 298mm Floating Discs
12 X M8 Stainless Disc Bolts
2 X New Billet Brake Hangers
8 X M10 X 30 Caliper Bolts
£245 + £15p&p (Please allow upto 3 weeks delivery, as this kit takes a while to assemble)
Or with Wavey Discs (As Bottom Picture) £340 + £15 p&p
Customers Comment
Frank
Blue Spot 4 Piston Caliper Rear Brake Upgrade (As Standard)
This will replace your standard caliper bracket, to enable the fitment of a right front Blue Spot 4 Piston Yamaha caliper.
You will need to fit a 298mm front disc to the rear, as the standard Max one is too thick.
(Or you can fit the standard 4 pot Max caliper if you want)
£80 + £10 p&p
Below is a list of Yamaha's that use this caliper.
FZS600 1998-2003
THUNDERCAT 1996-2003
YZF R6 1999-2004
TDM900 2002-2005
FZS FAZER 1000 2001-2006
THUNDERACE 1996-2002
YZF R1 1998-2003
FJR 1300 2001-2005
XJR 1300 1999-2002
NEW PRODUCT 07/10/08
Underslung 4 Pot Caliper Hanger
This conversion requires a Left Hand, Blue or Gold 4 Pot caliper
£90 + £10 p&p
I can also supply either of these as a kit:-
Detailed below.
p.s. The caliper and disc in the picture are for demonstration only.
Caliper Hanger (New)
Blue Spot Caliper (Used)
298mm Disc (Used)
Braided Line (New)
6 X St/Steel Disc Bolts (New)
2 X St/Steel Caliper Bolts (New)
£195 + £12p&p (Please allow upto 3 weeks delivery, as this kit takes a while to assemble)
This package is £282.50 + £12 p&p
Underslung Caliper Hanger
This conversion will allow the fitment of an R1 Blue spot rear caliper (1998-2002). A torque arm lug will need to be welded to the swingarm to take your aftermarket torque arm. The lug comes supplied with the Bracket.
You will need to supply your own caliper.
This conversion is ideal as an added extra to having one of my braced swingarms, as the lot can be supplied as a kit.
The additional braking that this caliper offers is unbelievable over standard.
Fits with standard Vmax disc 278 or 282 mm
£75 + £8 p&p
or
To fit a 298 mm disc
£90 + £8 p&p
or
To fit a 320mm disc
£95 + £8 p&p
Or you could fit it on top like this.
Single Blue Spot Caliper
I usually have Blue Spot Rear calipers in stock for imediate delivery
£40 + £8 p&p
NOTCHED & BRACED SWINGARM
All Swingarm prices are Exchange, add £40 to cost for outright purchase, i.e. no Exchange.
Please Allow upto 28 Days for Delivery, as these are made to order.
This modification will allow the fitment of an aftermarket exhaust, and 17" wheel, the notching will allow clearance for a 180 and some 190 section tyres.
Comes in Powder Coated Silver or Black, Semi-Gloss
£90 exchange + £15 p&p
Please Note
This swingarm will not fit with standard Exhausts, but will take a standard rear wheel.
NOTCHED & BRACED FOR STANDARD EXHAUST
This modification allows the swingarm to be fitted with standard exhausts and a 17" wheel.
£110 exchange + £15 p&p
Please Note
This standard Exhaust swingarm will not fit with the standard 15" wheel only a 17" one.
FITTED HUGGER
I also provide a Hugger fitting service, to any swingarm at an additional cost of £20 if done at the same time as a braced swingarm, (i.e. weld the brackets in place)
Or £50 if no bracing is required, this includes stripping and re-powder coating, (i.e. weld the brackets in place)
Or + £80 if I supply the hugger, in which case there is no additional charge for welding the lugs on.
DIY KIT
The DIY kit will enable you to weld the brace in place yourself.
£38 + £8 p&p as pictured (For Systems with Balance pipes)
Or £47 + £8 p&p For The Standard Kit
Please allow upto 3 weeks for delivery.
Swingarm Bearings
I can supply Bearings for the swingarms at £25 / pr, + £2 p&p this does not include the seals.
SHORTENED SIDE STANDS
Shortened sidestands supplied, ideal for your 17" wheel convertions.
£35.00 inc p&p Exchange
WRAP AROUND RAD GRILLES
Manufactured from Mirror polished Stainless Steel, come complete with Stainless fixing screws.
Or Black Powder Coated
£30.00 + £5 p&p
GIVI LUGGAGE FITMENT KIT
Fitting Kit to enable a Givi Wingrack 2 to be fitted to your Vmax, which will then enable any of the boxes that Givi make to be fitted, and will convert your Max to a high speed tourer.
(As Below)
£70 + £10 p&p
BRAIDED HOSES
I can now supply Stainless Steel braided lines, cut to any length, (maximum 1.7mtrs) they come with either 20 deg stainless fittings or straight, and copper washers.
Please state length from centre to centre and oriantation of banjo's when ordering, Next day service.
1 Line......£28
2 Lines.....£54
3 Lines.....£80
4 Lines.....£108
p&p £1.50 / line
STAINLESS STEEL BOLTS
M10 X 30 Metric Fine (Caliper Bolts) £3.00ea... Free p&p
M8 X 25 Disc Bolts (Set Of Eighteen) £13.......... Free p&p
BANJO BOLTS
All Stainless Steel
Singles M10 X 1.25mm £3.75
Singles M10 X 1.00mm (Non Max) £3.75
Doubles M10 X 1.25mm £4.75
Free Delivery on all Banjo Bolts
Billet Ally Thundercat Front Wheel Spacers
These are required when fitting a Thundercat wheel to your Standard Forked Vmax. (Will not fit with aftermarket forks)
Saves you grinding your original spacer to fit.
£6 inc p&p
Exhaust End Cans
I now offer a shortening service, if you want your end can cut down or wadding taken out, I can now supply this service.
Contact me for prices, normally between £25 & £30 a can + return p&p
Some Of My Vmaxes
From This
To This
2007
2005
2004-2005
1998-2004
And My Zed
CONTACT DETAILS
E-mail:- sales@customvmaxservices.co.uk
Tel:- 01933 270003
Mob:- 07736 049401 or 07808 866245
PAYMENT BY PAYPAL
This will allow you to pay by credit card if you want.
Click Here For Paypal Log In, Click Send Money, type in :- customvmaxservices@sky.com
